Lo-Fly Dirt.
Description
An audio coloration utility plugin featuring individual modes for classic emulation of some iconic music production tools. This tool is meant to bring character, or "dirt" to your incoming audio signals.
Lo-Fly Dirt installs as an Audio Unit effect for hosts that support the format such as Audio Bus, Beatmaker 3, Garage Band, Cubasis, AUM, etc.
Default Mode:
Adds subtle character of the input sound. Simple saturation and light, preset compression are added to the overall sound bringing out unique tones & textures of your source audio. The wet/dry knob at the 100 or full position would leave source audio "warmed up."
60 Mode:
This preset mode is based on some of our favorite characteristics of an iconic drum machine. Activating this button should invite you to 12 bit nostalgia immediately boasting tasteful saturation, small amounts of compression, and a more rounded high end. Great on drums.
404 Mode:
One of our favorites, this mode is the only mode that should add subtle low-pass filtering to the input signal. This mode will apply low pass filtering at 12db per octave around 11.6Khz. The wet/dry knob will continue to filter the sound to no more than 200Hz. The signal will benefit from some additional signal boosting with minimal make-up gain and small amounts of bit rate reduction, or "dirt."
1200 Mode:
Also built around our love for another iconic drum machine, this mode brings great punch, character, and dirt to any signal it treats. Especially useful for drums and percussion based audio.
more punchier variation of the 60 mode. Enjoy 12 bit goodness by default, but additionally a boost the signals character by our dirt and boost in the low-mid frequencies.
8 Bit Mode:
Simply put, this mode brings back the classic sound of a legendary game console. We've added a bit of punch to the incoming signal and you're able to blend it with great 8 bit artifacts that will allow for some brand new creations...and fun!
SK- 5 Mode:
Also built off the things we love about the classic 8 bit sound, but with a twist...this mode adds HP filtering and punch! Instant dirt is applied when this mode is activated, high pass filtering and punch is applied as you move the signal from dry to wet. The HP filter is set to cutoff at 300Hz.
Lo-Fly Dirt installs as an Audio Unit effect for hosts that support the format such as Audio Bus, Beatmaker 3, Garage Band, Cubasis, AUM, etc.
Default Mode:
Adds subtle character of the input sound. Simple saturation and light, preset compression are added to the overall sound bringing out unique tones & textures of your source audio. The wet/dry knob at the 100 or full position would leave source audio "warmed up."
60 Mode:
This preset mode is based on some of our favorite characteristics of an iconic drum machine. Activating this button should invite you to 12 bit nostalgia immediately boasting tasteful saturation, small amounts of compression, and a more rounded high end. Great on drums.
404 Mode:
One of our favorites, this mode is the only mode that should add subtle low-pass filtering to the input signal. This mode will apply low pass filtering at 12db per octave around 11.6Khz. The wet/dry knob will continue to filter the sound to no more than 200Hz. The signal will benefit from some additional signal boosting with minimal make-up gain and small amounts of bit rate reduction, or "dirt."
1200 Mode:
Also built around our love for another iconic drum machine, this mode brings great punch, character, and dirt to any signal it treats. Especially useful for drums and percussion based audio.
more punchier variation of the 60 mode. Enjoy 12 bit goodness by default, but additionally a boost the signals character by our dirt and boost in the low-mid frequencies.
8 Bit Mode:
Simply put, this mode brings back the classic sound of a legendary game console. We've added a bit of punch to the incoming signal and you're able to blend it with great 8 bit artifacts that will allow for some brand new creations...and fun!
SK- 5 Mode:
Also built off the things we love about the classic 8 bit sound, but with a twist...this mode adds HP filtering and punch! Instant dirt is applied when this mode is activated, high pass filtering and punch is applied as you move the signal from dry to wet. The HP filter is set to cutoff at 300Hz.
Peep a quick "how-to" on getting set up in apps such as Garageband [FREE] with Lo-Fly Dirt.
---------------------------------------------------------------------------------------------
Fly Tape.
Description:
Fly-Tape is a unique MSXII look on some of the aspects about tape that we love while adding some unique features that are enjoyable! Fly Tape installs as an iOS AUv3 plugin effect, designed for use within host apps such as Garageband, Beatmaker 3, Cubasis, Audiobus, and more. Standalone mode for demo purposes.
Named for it's performance style of use, users can adding FX to their incoming audio signals in many ways "on the Fly." Sliders for textured nuances such as hiss & pitch will allow you to dial in tasteful settings that can become reminiscent of cassette tapes. These also can be automated via midi cc for additional modulation.
Fly Tape FX:
Fly Tape includes numerous touch based FX. These FX also release upon button release to enhance the performance experience. Additionally, some FX have more settings upon a quick, double-tap of the effect.
Play Button
• Will start audio (demo drum loop) in standalone mode
• Disabled while in plugin mode
Stop Button
• Will stop playing audio with a scrubbing, slow down effect
• Release will resume audio
Pause Button
• A simple audio mute. Useful for drops in performance
• Release will resume audio
Bypass Switch
• Bypass Fly-Tape audio effect unit as a whole
Noise Slider
• Gradual increase of "hiss" simulation from left to right
Pitch Slider
• Gradual detuning of audio from left (normal) to right (-.50 cents)
Half-Speed FX Button
• Plays audio at half-speed
• Normal playback resumes on release
• Half-Speed will stay in time with current host tempo
Saturate Button
• 2 saturation modes "Clean" & "Gritty" available
• Quick double tap will prompt small menu option
• Release will resume normal audio without effect
Lofi Button
• 3 lofi modes "70's", "80's", and "90's" available
• Quick double tap will prompt small menu option
• Release will resume normal audio without effect
Loop Button
• Reverses and loops audio while pressed
• Release will resume normal audio without effect
Stutter Button
• 8 stutter quantize settings available
• Quick double tap will prompt small menu option
• Settings available are 1/2, 1/4, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/64
• Stutter is immediate upon press, release will resume audio without effect
Tips:
FX buttons can be chained in unique ways to deliver awesome results such as Lofi "70's --> Saturate "Clean" --> Half-Speed.
All parameters of Fly Tape can be mapped in your favorite hosts. For example, you can map the Noise & Pitch sliders to faders or knobs on your favorite midi controller.
Fly Tape's Midi CC values are listed below:
Bypass: 102
Pitch: 103
Noise: 104
Tape Stop: 106
Mute (Pause): 107
Half-Speed: 108
Saturate: 109
Lofi: 110
Loop: 111
Stutter: 112
Named for it's performance style of use, users can adding FX to their incoming audio signals in many ways "on the Fly." Sliders for textured nuances such as hiss & pitch will allow you to dial in tasteful settings that can become reminiscent of cassette tapes. These also can be automated via midi cc for additional modulation.
Fly Tape FX:
Fly Tape includes numerous touch based FX. These FX also release upon button release to enhance the performance experience. Additionally, some FX have more settings upon a quick, double-tap of the effect.
Play Button
• Will start audio (demo drum loop) in standalone mode
• Disabled while in plugin mode
Stop Button
• Will stop playing audio with a scrubbing, slow down effect
• Release will resume audio
Pause Button
• A simple audio mute. Useful for drops in performance
• Release will resume audio
Bypass Switch
• Bypass Fly-Tape audio effect unit as a whole
Noise Slider
• Gradual increase of "hiss" simulation from left to right
Pitch Slider
• Gradual detuning of audio from left (normal) to right (-.50 cents)
Half-Speed FX Button
• Plays audio at half-speed
• Normal playback resumes on release
• Half-Speed will stay in time with current host tempo
Saturate Button
• 2 saturation modes "Clean" & "Gritty" available
• Quick double tap will prompt small menu option
• Release will resume normal audio without effect
Lofi Button
• 3 lofi modes "70's", "80's", and "90's" available
• Quick double tap will prompt small menu option
• Release will resume normal audio without effect
Loop Button
• Reverses and loops audio while pressed
• Release will resume normal audio without effect
Stutter Button
• 8 stutter quantize settings available
• Quick double tap will prompt small menu option
• Settings available are 1/2, 1/4, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/64
• Stutter is immediate upon press, release will resume audio without effect
Tips:
FX buttons can be chained in unique ways to deliver awesome results such as Lofi "70's --> Saturate "Clean" --> Half-Speed.
All parameters of Fly Tape can be mapped in your favorite hosts. For example, you can map the Noise & Pitch sliders to faders or knobs on your favorite midi controller.
Fly Tape's Midi CC values are listed below:
Bypass: 102
Pitch: 103
Noise: 104
Tape Stop: 106
Mute (Pause): 107
Half-Speed: 108
Saturate: 109
Lofi: 110
Loop: 111
Stutter: 112